Laboratory Fume Hood

Product Details:

Laboratory Fume Hood is when used properly, is one of the most reliable engineering controls in the laboratory. They protect workers by: Containing vapors, dusts, gases, and fumes generated within the hood, and removing them as air flows into the hood and then out via the laboratory exhaust system.

Product Details:

Walk In Fume Hood are available in the standard lengths of 4ft to 9ft and also available for custom sizes depending on the lab space requirements. Their exterior panels are constructed with heavy gauge cold rolled steel, phosphate coated with a baked chemical resistant and synthetic resin finish. They are available with vertical and horizontal sash types, radiuses corner posts and airfoils for smooth air movement assuring high levels of comfort, safety and efficiency. These hoods are designed and tested using ASHRAE 110-1995, BS 7258 and DIN 12.924 Standards.

Features:

• Adjustable Baffles
• Air Flow and Static Pressure Alarms
• Service Fittings and Piping
• Electrical Fixtures and Wiring
• UL listed when pre-wired per UL 61010A-1
• 1805 UL classified with Kemglass, Stainless
• Steel, or Phenolic Resin liner
• Vapor Proof and Explosion Proof Lighting
• Stainless Steel Deflector Vane
• Alternate Sash Handles
• Sash Frame
• Tempered Sash Glass
• Tissue Screen
• Fire Extinguisher
• Distillation Rack
• Sash Stop
• Stainless Steel Duct Collar
• Work Floor & Removable Work Shelf

Product Details:

Distillation Fume Hood is used where a taller apparatus is required and where convenient access to the floor of the hood is needed. Distillation hoods are equipped with frameless sashes with full-length formed steel handle for neat, clean appearance with streamlined features.

Product Details:

Chemical Lab Fume Hood is a type of ventilation system that primarily functions to provide personal protection against toxic fumes, vapors and dust. Its secondary function includes protection against chemical spills, runaway reactions and fires by acting as a physical barrier.

Product Details:

Fume Hood Acid Storage Cabinets:

• Acid storage fume hood cabinets shall utilize the same thickness of steel and construction features as other base cabinets except they shall be completely lined with a Polyethylene corrosion resistant liner. The liner shall be 5mm thick, Each door shall have a set of louvers at the top and bottom, and have a 3mm sheet polyethylene liner. Where specified, each cabinet shall be vented into the fume hood with a 40mm vent pipe. It should provide a positive airflow directly into the fume hood exhaust system. Where specified or shown on drawings, epoxy coated wire shelf supported by integral brackets shall be built into the Polyethylene liner.